Vibratory Sieve Shaker
ANALYSETTE 3 PRO
The Vibratory Sieve Shaker ANALYSETTE 3 PRO is delivered incl. tensioning and the software AUTOSIEVE (90 day test version free of charge).
Please note: For this FRITSCH Sieve Shaker you also need a clamping lid, test sieves and sieve pan.
The ANALYSETTE 3 can be converted into a Vibratory Micro Mill PULVERISETTE 0 for comminution and homogenizing of small sample amounts:
FRITSCH also offers the sieve shaker ANALYSETTE 3 SPARTAN with manual amplitude control:
ACCESSORIES FOR DRY SIEVING
For observation of the sieving process, sieve clamping lids made of plexiglas are available for FRITSCH test sieves of 100 mm or 200 mm/8“ diameter. You also receive a clamping lid made of POM plastic (without window) to sieve materials for which metallic contamination must be avoided. Also available are corresponding sieve pans and sieves made of plastic. Sieve pans and interposed sieve pans for multiple sieving operations in a single process are available in stainless steel for all sieve sizes.
ACCESSORIES FOR DRY SIEVING
For dry sieving with test sieves 200 mm/8" dia.
The clamping lid made of plexiglas allows the operator to observe the sieving process.
For applications, where it is not required to observe the sieving process, a clamping lid without window insert article no. 31.2050.00, is also available.
This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.
For dry sieving for all test sieves up to 200 mm/8" dia.
The POM plastic clamping lid without window for applications, where it is not required to observe the sieving process, respectively in order to sieve materials where a metallic contamination must be avoided. For applications, where it is required to observe the sieving process, a clamping lid with window insert article no. 31.2020.00, is also available.
This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN.
The needed sieve pan and the sieves must be ordered separately.
| General specifications | |
| Material | POM Polyoxymethylene |
| ISO/EN/DIN Code | DIN 7728 C9021 |
| Chemical composition | |
| Element | Formula |
| Polyoxmethylenecopolymer (Polyacetale) | CxH2xOx |
| Melting point | 165° C |
| max. Application temp. constant | 90° |
| max. Application temp. briefly | 140° |
| Chemical Resistance | |
| Aliphatical hydrocarbon | |
| Aromatical hydrocarbon | |
| Halogenised hydrocarbon | |
| weak acid | |
| strong alkaline solution | |
| Physical and mechanical properties | |
| Density | 141,g /cm³ |
| Hardness | extremely hard |
For dry sieving with test sieves 200 mm/8" dia.
Consisting of clamping lid plexiglas for test sieves 200 mm and 8" dia. and electrical tool 100 -240 V/1~, 50 -60 Hz
TorqueMaster enables automatic and reproducible tensioning of the sieve stack on the sieve shaker during dry sieving with test sieves 200 mm/8" diameter. Although the tensioning has a great influence on the sieving result, it is relatively undefined in conventional systems. The universal sieve clamping system TorqueMaster delivers constant and reproducible clamping forces of ~ 1 kN to the sieve stack, enabling the calibration of the sieve tensioning – essential when using the ANALYSETTE 3 PRO as inspection instrument according to ISO 9001.
Although you may not have a FRITSCH sieve shaker, the TorqueMaster is the best tensioning system for your sieve stack. TorqueMaster can be attached and used with any sieve shaker.
Clamping lid POM plastic with security glass for dry sieving with test sieves 100 mm dia. and grinding head for conversion of the ANALYSETTE 3 to the PULVERISETTE 0.
The clamping lid with security glass allows the operator to observe the sieving process and the ANALYSETTE 3 can be used with this clamping lid as Vibratory Micro Mill PULVERISETTE 0 for milling and homogenizing of small quantities of samples (sample quantity: 0.1 – 10 ml, max. feed size: < 5 mm, final fineness: 5 – 10 µm).
| General specifications | |
| Material | POM Polyoxymethylene |
| ISO/EN/DIN Code | DIN 7728 C9021 |
| Chemical composition | |
| Element | Formula |
| Polyoxmethylenecopolymer (Polyacetale) | CxH2xOx |
| Melting point | 165° C |
| max. Application temp. constant | 90° |
| max. Application temp. briefly | 140° |
| Chemical Resistance | |
| Aliphatical hydrocarbon | |
| Aromatical hydrocarbon | |
| Halogenised hydrocarbon | |
| weak acid | |
| strong alkaline solution | |
| Physical and mechanical properties | |
| Density | 141,g /cm³ |
| Hardness | extremely hard |
For dry sieving with test sieves 200 mm dia.
If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For dry sieving with test sieves 8" dia.
If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For dry sieving with test sieves 200 mm dia.
The sieve pan made of stainless steel completes the sieve stack.
The sieve pan made of stainless steel is also available in 200 mm dia., 25 mm height.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For dry sieving with test sieves 8" dia.
The sieve pan made of stainless steel completes the sieve stack.
This sieve pan made of stainless steel is also available in 8" dia., 1" height.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For dry sieving with test sieves 100 mm dia.
The sieve pan made of stainless steel completes the sieve stack.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Accessories for wet sieving
During wet sieving with test sieves (200 mm/8“), the specially developed clamping lid with 2 rotation nozzles ensures an uniform spraying of the sieving material from above and an optimal sieving effect. Special interposed sieving rings with three nozzles are available for simultaneous spraying of the top and bottom sieves. A sieve clamping lid of plexiglas with 1 nozzle is also offered for wet sieving with 100 mm test sieves. The corresponding sieve pans with outlet are available for all sieve sizes. To prevent the occurrence of air cushions during wet sieving with test sieves < 100 µm FRITSCH offers special venting rings.
Accessories for wet sieving
With 2 rotation nozzles for wet sieving with test sieves 200 mm/8" dia.
The wet clamping lid features 2 rotation nozzles which sprays the entire interior chamber, thus helping to flush the material through the sieve apertures.
Especially recommended for materials with a high electrostatic charge or very high content of fine material. This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.
For wet sieving with test sieves 200 mm dia.
The sieve pan made of stainless steel with outlet completes the sieve stack.
This sieve pan made of stainless steel with outlet is also available in 200 mm dia., 25 mm height.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For wet sieving with test sieves 200 mm dia.
For simultaneous spraying the sieves above and below.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Venting ring for test sieves 200 mm dia. - required when utilizing test sieves < 100 µm. Venting rings are used to prevent the occurrence of air cushions during wet sieving.
For wet sieving with test sieves 8" dia.
The sieve pan made of stainless steel with outlet completes the sieve stack.
This sieve pan made of stainless steel with outlet is also available in 8" dia., 1" height.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For wet sieving with test sieves 8" dia.
For simultaneous spraying the sieves above and below.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Venting ring for test sieves 8" dia. - required when utilizing test sieves < 100 µm. Venting rings are used to prevent the occurrence of air cushions during wet sieving.
with 1 nozzles for wet sieving with test sieves 100 mm dia.
The wet clamping lid features 1 nozzle which sprays the entire interior chamber, thus helping to flush the material through the sieve apertures.
Especially recommended for materials with a high electrostatic charge or very high content of fine material.
This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and sieves must be ordered separately.
For wet sieving with test sieves 100 mm dia.
The sieve pan made of stainless steel with outlet completes the sieve stack.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Certification
For certification of the ANALYSETTE 3 PRO as an inspection instrument, a 3.1 EN 10204 inspection certificate as well as a form for IQ/OQ documentation are available. A 3.1 EN 10204 inspection certificate is also offered for FRITSCH test sieves in accordance with ISO 3310-1.
Certification
Inspection certificate 3.1 EN 10204 for FRITSCH Sieve Shaker ANALYSETTE 3 PRO
The inspection certificate 3.1 EN 10204 enables the use of the Sieve Shaker ANALYSETTE 3 PRO as calibration and validation inspection instrument.
Of course, we would also be happy to recertify your FRITSCH Vibratory Sieve Shaker ANALYSETTE 3 PRO at our headquarters in Idar-Oberstein.
Please note: if necessary please order together with each test sieve.
Inspection certificate 3.1 EN 10204 for test sieves according to ISO 3310-1
The inspection certificate 3.1 EN 10204 is essential when using the test sieves as testing equipment in accordance with DIN EN ISO 9001.
Of course, we would also be happy to recertify your FRITSCH test sieves according to ISO 3310-1 at our headquarters in Idar-Oberstein.
Please note: if necessary please order together with each test sieve.
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the ANALYSETTE 3 PRO.
Accessories for automatic evaluation of sieve analysis
The multilingual software AUTOSIEVE for controlling the ANALYSETTE 3 PRO and for automatic evaluation, simple monitoring and documentation of your sieving results.
Accessories for automatic evaluation of sieve analysis
Software AUTOSIEVE-activation for installation on up to 3 Windows PC's after expiration of the free of charge test phase for FRITSCH software AUTOSIEVE for Windows.
System requirements - Software AUTOSIEVE
Minimum software requirements: Windows 7 or higher
Minimum hardware requirements: standard WINDOWS ™ PC with at least 2 Gbyte RAM
Your advantages with AUTOSIEVE:
- Automatic evaluation of your sieve Analysis
- Simple monitoring and documentation of your sieving results
- Suitable for all FRITSCH Sieve Shakers: Vibratory Sieve Shakers ANALYSETTE 3 PRO and ANALYSETTE 3 SPARTAN and the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18
- After conducting your sieving– simply connect the laboratory analysis balance, then weigh the sieves before and after sieving using differential weighing – AUTOSIEVE will do the rest
- Extensive presentation of the results: presentation and printout as cumulative or frequency distribution and as graphs according to DIN ISO 9276-1
- Controlling of the Vibratory Sieve Shaker ANALYSETTE 3 PRO and entry of all functions such as amplitude, sieving time, interval operation and the type of sieving comfortable via the computer
- Monitoring of the sieving via the online-comparison of the set and actual amplitude and therefore an auto validation of the sieving process with the Vibratory Sieve Shaker ANALYSETTE 3 PRO
FRITSCH offers for the differential weighing of the sieves a special laboratory analysis balance for the Vibratory Sieve Shakers ANALYSETTE 3 PRO and SPARTAN, which you can order with the following order no. 03.2600.00.
A laboratory analysis balance for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 is available on request.
Up to 4.1 kg (± 0.01 g) with RS232 interface, incl. computer connection cable for automatic sieve evaluation.
The extensive Software AUTOSIEVE for WindowsTM enables the automatic sieve evaluation with every FRITSCH Sieve Shaker. For this purpose a special laboratory analysis balance is required for the Vibratory Sieve Shakers ANALYSETTE 3 PRO and SPARTAN, which you can order with the above mentioned order no. 03.2600.00.
A laboratory analysis balance for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 is available on request.
Sieving Accessories
We supply everything you need for sieving, like for example sieving aids, sieve covers, replacement seal rings as well as cleaning liquid for the sieves.
For dry sieving of materials with a high share of fine particles use 10 mm agate balls or 20 mm rubber balls should be used as sieving aids for medium and large sieves and 5 mm agate balls are utilized for fine sieves. Your advantage: They prevent clogging of the sieve mesh.
Sieving aids
General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft to medium-hard sample
100 grinding balls made of agate with 5 mm dia. weigh approx. 17 g. With the weight information, the high number of balls per grinding bowl can be determined by weighing.
Grinding balls made of agate with 5 mm dia. are also recommended as sieving aid for dry sieving of material with a high proportion of fine particles.
Recommended number per sieve: 15 pieces.
| General specifications | |
| Material | Agate – SiO2 |
| Chemical composition | |
| Element | Share % |
| Silicon oxide– SiO2 | 99.9 |
| Aluminium – Al2O3 | < 0.02 |
| Iron oxide – Fe2O3 | < 0.02 |
| Calcium oxide – CaO | < 0.02 |
| Magnesium oxide – MgO | < 0.02 |
| Sodium oxide – Na2O | < 0.02 |
| Potassium oxide – K2O | < 0.02 |
| Manganese oxide – MnO | < 0.02 |
| Physical and mechanical properties | |
| Density | 2.65 g/cm³ |
| Hardness | 6.5 – 7 Mohs |
Explanations on hardness data
General material specification:
Material: agate - SiO2
Abrasion resistance: good
Suitable for: soft to medium-hard sample
Grinding balls made of agate with 10 mm dia. are also recommended as sieving aid for dry sieving of material with a high proportion of fine particles.
Recommended number per sieve: 10 pieces.
| General specifications | |
| Material | Agate – SiO2 |
| Chemical composition | |
| Element | Share % |
| Silicon oxide– SiO2 | 99.9 |
| Aluminium – Al2O3 | < 0.02 |
| Iron oxide – Fe2O3 | < 0.02 |
| Calcium oxide – CaO | < 0.02 |
| Magnesium oxide – MgO | < 0.02 |
| Sodium oxide – Na2O | < 0.02 |
| Potassium oxide – K2O | < 0.02 |
| Manganese oxide – MnO | < 0.02 |
| Physical and mechanical properties | |
| Density | 2.65 g/cm³ |
| Hardness | 6.5 – 7 Mohs |
Explanations on hardness data
Are recommended as sieving aids for dry sieving of materials with a high proportion of fine particles.
Recommended quantity per sieve: 5 pieces
Sieve Covers
Sieve cover for a test sieve 200 mm dia. or to cover the whole sieve stack 200 mm dia.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve cover for a test sieve 8" dia. or to cover the whole sieve stack 8" dia.
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Sieve cover for a test sieve 100 mm dia. or to cover the whole sieve stack 100 mm dia.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Replacement seal rings
Replacement seal ring NBR for test sieves:
200 mm dia., 50 mm height
8" dia., 2" height
200 mm dia., 25 mm height
Replacement seal ring NBR for test sieves:
100 mm dia.
Cleaning liquid for sieves
Can of 2.5 litres concentrated cleaning liquid, alkaline, for dilution 1:33.
Ideal for gentle and effective cleaning of your test and micro-precision sieves. With reliable protection
against corrosion of stainless steel, nickel and bronze.
| General specifications | ||
| Chemical formula | Combination of tensides, glycols and environmentally friendly complexing agents | |
| Regulations | Not subject to labelling requirements according to the EC-Guidelines for Hazardous Materials Ordinance | |
| Density | ~ 1.01 g/cm3 | |
| PH value | > 11 (undiluted) | |
| Toxicological information | non-irritant for skin, eyes etc. | |
| First aid | refer to enclosed label | |
| Environmental information | do not discard into groundwater, canalisation or bodies of water | |
| Disposal | Must be according to official regulations be specially treated prior to discarding | |
Accessories for grinding and homogenising small sample quantities
Clamping lid POM plastic with security glass for dry sieving with test sieves 100 mm dia. and grinding head for conversion of the ANALYSETTE 3 to the PULVERISETTE 0.
The clamping lid with security glass allows the operator to observe the sieving process and the ANALYSETTE 3 can be used with this clamping lid as Vibratory Micro Mill PULVERISETTE 0 for milling and homogenizing of small quantities of samples (sample quantity: 0.1 – 10 ml, max. feed size: < 5 mm, final fineness: 5 – 10 µm).
| General specifications | |
| Material | POM Polyoxymethylene |
| ISO/EN/DIN Code | DIN 7728 C9021 |
| Chemical composition | |
| Element | Formula |
| Polyoxmethylenecopolymer (Polyacetale) | CxH2xOx |
| Melting point | 165° C |
| max. Application temp. constant | 90° |
| max. Application temp. briefly | 140° |
| Chemical Resistance | |
| Aliphatical hydrocarbon | |
| Aromatical hydrocarbon | |
| Halogenised hydrocarbon | |
| weak acid | |
| strong alkaline solution | |
| Physical and mechanical properties | |
| Density | 141,g /cm³ |
| Hardness | extremely hard |
Test sieves made of stainless steel, 200 mm diameter, 50 mm high according to ISO 3310-1
-
If test sieves are required in other diameters, please note the ordering examples:
Deviation from standard sieve size ISO 3310-1 mesh width mm/µm ASTM E11 mesh test sieve mesh width 5 mm
200 mm dia. , height 50 mm = standard sizefor example 30.1800.03 for example 35.1800.03 test sieve mesh width 5 mm
200 mm dia., height 25 mmreplace 5th position = "0" in order no. by "1" for example 30.1810.03 for example 35.1810.03 test sieve mesh width 5 mm
8" dia., height 2"replace 5th position = "0" in order no. by "2" for example 30.1820.03 for example 35.1820.03 test sieve mesh width 5 mm
100 mm dia., height 40 mmreplace 5th position = "0" in order no. by "4" for example 30.1840.03 for example 35.1840.03 -
Additional Information
Test sieves and sieving accessories in other diameters and mesh widths on request.
Test sieves made of polyamide are available on request.
'Test sieves and sieving accessories can not be exchanged or returned.
For dry and wet sieving with mesh widths from 20 μm to 63 mm: especially light, robust and manufactured in high quality. Highly alloyed stainless steel protects against corrosion and simplifies cleaning. Groove-free mesh transitions prevent contamination of the sieving material. Every sieve is laser-engraved, optically measured and delivered with a compliance certificate.
Test sieves made of stainless steel, 200 mm diameter, 50 mm height according to ISO 3310-1, with compliance certificate
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 200 mm dia., 50 mm height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
8" dia., 2" height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieves made of stainless steel, 8" dia., 2" height according to ASTM E11 mesh
-
If test sieves are required in other diameters, please note the ordering examples:
Deviation from standard sieve size ISO 3310-1 mesh width mm/µm ASTM E11 mesh test sieve mesh width 5 mm
200 mm dia. , height 50 mm = standard sizefor example 30.1800.03 for example 35.1800.03 test sieve mesh width 5 mm
200 mm dia., height 25 mmreplace 5th position = "0" in order no. by "1" for example 30.1810.03 for example 35.1810.03 test sieve mesh width 5 mm
8" dia., height 2"replace 5th position = "0" in order no. by "2" for example 30.1820.03 for example 35.1820.03 test sieve mesh width 5 mm
100 mm dia., height 40 mmreplace 5th position = "0" in order no. by "4" for example 30.1840.03 for example 35.1840.03 -
Additional Information
Test sieves and sieving accessories in other diameters and mesh widths on request.
Test sieves made of polyamide are available on request.
'Test sieves and sieving accessories can not be exchanged or returned.
For dry and wet sieving with mesh widths from 20 μm to 63 mm: especially light, robust and manufactured in high quality. Highly alloyed stainless steel protects against corrosion and simplifies cleaning. Groove-free mesh transitions prevent contamination of the sieving material. Every sieve is laser-engraved, optically measured and delivered with a compliance certificate.
Test sieves made of stainless steel, 8" dia., 2" height according to ASTM E11 mesh, with compliance certificate
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 8" dia., 2" height, frame and mesh wire made of stainless steel with compliance certificate.
In the selection aid you will find the order numbers for this sieve in the following sizes:
200 mm dia., 25 mm height
200 mm dia., 50 mm height
100 mm dia., 40 mm height
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
